If you are Indian thinking of installing a water purifier at your home, then Kent water purifier is the first choice that might come to your mind. Kent water purifier is considered the leading water purifier brand in India.
However, installing a water purifier is not everyone’s cup of tea. You need to have some expert knowledge of it. Well, if you have decided to install a Kent water purifier in your house, then this product manual will guide you to make a hassle-free installation. So without wasting any more time. Let us take a look at the correct way to install a water purifier.
Site preparations essentialities
If you are about to buy a water purifier, then site preparation is the foremost important task. Before bringing the Kent water purifier to your home, take a look at the site preparation guidelines.
- You must be required to arrange the source of raw water supply. It must have a ½ inch nipple and must be within 3m away from the water purifier.
- You will need to arrange an installation space as per the dimension of your Kent water purifier.
- The surface of the wall must be plain, and you must avoid metallic or wooden stands for the installation.
- Check out the water inlet pressure of the water source. As per the requirements, it must be 10ft above the purifier.
- If you want to have easy availability of the inlet water line then you must install the purifier near a sink.
Procedure of installation
This section will provide you the stepwise guidance on the installation of the Kent water purifier.
Step 1: You will need two self-tapping screws of 10×50, 5.4 inches (138 mm) for the installation. The screws must be apart horizontally.
Step 2: You will find some slot holes on the backside of the water purifier. These holes will help to wall mount the water purifier.
Step 3: You must fasten up the valve of the SS ball to the ¼ inch port of the three-way connector.
Step 4: Now, take out the threaded end of the three-way connector and attach it with the raw water supplying resource. Thereafter, you will need to plug off the other end of the three-way connector and connect it with the tap.
Step 5: At the next step, you will need to connect one end of the SS ball valve with the pipe and take the other end of the pipe and connect it with the elbow fitting connector of your Kent water purifier. You can find this connector at the left side of your water purifier, and it will be labeled as WATER IN.
Step 6: Now, turn on the lever that you can find on the SS ball valve. This will help to initiate the water flow of the water purifier.
Step 7: Finally, you must wait for a little while to allow the water purifier to pre-soak it in the water. It will take near about 2 to 3 minutes to complete the pre-soaking session. Congratulations, now you have successfully completed all the steps of Kent water purifier installation.
Steps to starting up the water purifier
After successfully completing the installation steps, now your Kent water purifier is ready to be used. Now is the time to start up your water purifier, here having look at the steps that can help to start up the water purifier.
- First, you will need to turn on the lever of the SS valve. This will help to initiate the water flow of your Kent water purifier.
- Then you must fill up the storage tank of the water purifier to its maximum level.
- Now, turn off the lever of the SS ball valve. It will stop the water flow of your water purifier.
- Thereafter, open up the plug of the drain. You can find it at the bottom of the Kent water purifier storage tank. You must completely drain the tank for removing the dust particle that is presented in the storage tank and several pipes of your water purifier.
- Then, bring back the drain plug into its previous position and turn on the lever of the SS ball valve. Now, take a glass and enjoy your first sip of purified water.
Now, what are you waiting for? Go and get your Kent water purifier from the shop. Hope this guide will help you to reduce the installation cost of your water purifier.Hope the sip of purified water will bring lots of fresh vibes to your life. Don’t be worried about the price of the water purifier. You have the right to drink fresh water. You can now buy it on the no-cost EMI scheme at the EMI Store.
