The ability to use a washer and dryer allows a person to wash their clothes efficiently and in a timely manner. These instructions will walk you through the basics of washing clothes with a washer and dryer. here are the 16 Simple Steps to Do Laundry
Equipment and Material Needed
- Washer
- Dryer
- Laundry Detergent (liquid or powder)
- Fabric Softener
- Dryer Sheets (if desired)
- Hangers for any clothes you wish to be hung up after cleaning
- Iron and Ironing Board (optional)
Step 1: Separate Clothes
Start by identifying the clothes you need for a group swim.
- Whites
- Colors
Then break these categories down into heavy materials (such as cotton and wool) and lighter materials (polyester and silk). Also share the treats. Delicates are clothes made from delicate materials that must be hand washed.
Also Read: dry cleaners and alterations
Step 2: Select Water Temperature
Check the label on the garment, it should indicate an optimal temperature for the wash cycle and the wash cycle.
Step 3: Select Load Size
Depending on how many things you need to clean, you must choose your size. If the washing machine is less than 1/4 full, it is recommended to use the medium setting at 2/4, and at 3/4 use the high setting.
Step 4: Select Load Type
A large machine usually has a structure that you can turn to choose between open and closed (sometimes called a rake). These two advantages are separated by peso, de leva a pesado.
Step 5: Start the Washer
This is usually done by pressing a button or lightly pressing a switch indicating the type of charge. Run the washing machine until it is about 1/4 full, then turn it off.
Step 6: Add Detergent
Before opening the lid of the washing machine, then measure the necessary washing powder (liquid or powder). Size often determines the need for cleanliness. This amount varies depending on the detergent used. Finally, add the detergent to the washing machine, some washing machines have a special place for cleaning. Let the washer run for 10 seconds to release the detergent.
Step 7: Add Clothes to Washer
With the lid still open, slowly add the clothes one at a time, being careful not to tangle them.
Caution: Avoid filling the washing machine more than 3/4 full. This will allow clothes to be agitated (or moved briskly) during the washing cycle.
Step 8: Add Fabric Softener (Optional)
You can also add softeners. Fabric softeners are used to soften fibers, reduce static electricity, and even add fragrance to clothing.
Caution: Avoid using fabric softeners on the following;
- Made of microfiber
- Athletic Sportswear
- Flame-Retardant Clothing
- Towels
Step 9: Select Drying Temperature
The drying temperature is usually determined by the type of material; In general, cotton clothes should be set at a high temperature, easy-care clothes (polyester blends) should usually be set at a medium temperature, and delicates should usually be set at a low temperature. Some dryers also allow clothes to be dried without using heat.
Step 10: Select Drying Time
Like the drying temperature, the drying time is also determined by the type of material. Most dryers have multiple settings within the fabric type. Most dryers also include a timed drying cycle, which allows you to dry clothes that for some reason are not completely dry or only require a small amount of drying.
Step 11: Clean Lint Trap
Don’t skip this step. It is important to empty the lint container after every use of the dryer. The lint container is usually located on the inside of the dryer door.
Step 12: Add Clothes to Dryer
Like putting clothes in the washing machine, you should set aside time so they don’t get tangled. Tangled clothes may take longer to dry.
Step 13: Add Dryer Sheet (Optional)
If you use fabric softener when washing, you don’t need to add dye. Dryer sheets act as a fabric softener to help prevent static electricity and can have a fragrance effect on your clothes.
Step 14: Start Dryer
After selecting the drying temperature and drying time, close the dryer door and turn on the machine. Some models have a button that you press, while others have a dial that you turn and release.
Caution: Please do not leave clothes unattended while drying. There is a potential risk of a fire hazard if a dryer is not properly maintained or is used improperly.
Also Read: dry cleaners repairs and alterations
Step 15: Remove Clothes
Some clothes may not need the entire drying cycle. After restarting, remove the dry items and leave the wet items to complete the drying cycle. It is best to hang up clothes that are easy to clean (such as shirts or trousers). The rest can be folded as usual.
Step 16: Ironing (Optional)
Some types of clothing must be ironed after the drying cycle. To do this, you must have an iron and an ironing board. Ironing is the process of removing wrinkles from clothes that are supposed to look good (like shirts).
- Make sure you have a spray bottle of water handy or if you are using an iron that has room to add water.
- Place your ironing board near an electrical outlet.
- Connect the iron and turn it on. Then position it so that the surface of the iron is perpendicular to the ironing board.
- Most irons have a dial that sets the temperature of the fabric you are ironing.
- Allow the iron time to heat up.
- Place the garment to be ironed on the ironing board so that the fabric is relatively smooth without wrinkles.
- Gently brush the material if there is water in the metal, this is not necessary.
- Hold the iron by the handle and tilt it so that it is parallel to the ironing board.
- Use the iron to apply firm but even pressure to the shirt and move the iron along the fold so that the fold begins to flatten. Remember to move the iron along the fabric to avoid burning the fabric. Repeat this step as needed to go over (remove) the crease.
WARNING! DO NOT leave the iron sitting face down on any surface. This may create a potential fire hazard.
Repeat the above step on the other parts of the garment until you are sure you have gone through all the wrinkles. Hang up the garment you just ironed to maintain the ironed look.
Recommended Blog:
Tips to Start Laundry Pickup and Delivery Services
