Everyone looks forward to taking a hot, steamy shower after a hard day at work or at the gym or even simply to wash the day’s filth off. There is nothing worse than a drip of hot water coming from your showerhead. Hence we refer to them as showers rather than trickles.
Low water pressure is evident if your shower is more of a gentle trickle than a powerful jet. In addition to being annoying, it could be expensive to fix. Here’s how to determine what could be the root of the issue and, even better, how to resolve it.
How to Check the Shower’s Water Pressure
The procedures below may be used to test the water pressure in your shower using a 1L jug and the timer on your phone.
- Put the jug below the showerhead.
- Start the stopwatch and fully turn on the shower’s faucet.
- After the jug is filled, turn off the timer.
- You have poor water pressure if it takes more than six seconds to fill the jug.
Calling your dependable plumber in Hornsby is a different option since they will have a water pressure gauge to check the flow.
What Leads to Low Shower Water Pressure
We must first identify the potential causes of the shower’s low output before we can remedy the water pressure issue. Some of the causes of low water pressure are listed below.
-
Pipes and fixtures that are clogged or leak
Blockages or leaks in your plumbing system are the most common causes of low water pressure. Aging pipes especially those exposed to water pressure more than 60 psi are susceptible to cracking or developing tiny holes, which leads to leaks. Your pipes’ leaks cause low water pressure by allowing water to escape before it reaches the showerhead. A qualified plumber should repair any blocked or leaky pipes as soon as feasible. These may cause more expensive problems in the future, such as structural damage if the pipe bursts, permanent damage to your plumbing that need repair, or hazardous mould growth that necessitates removal.
2.Showerhead with Low-Flow
Low-flow or water-saving showerheads might be to blame for your poor water pressure. These fixtures limit water flow to decrease water use, utility costs, and the usage of scarce water. Although if the rate at which the water is delivered essentially stays the same, you can easily tell whether you have a low-flow showerhead if your shower feels lighter on your skin or is more like a misty spray.
-
A clogged
shut-off valve or a worn-out mixing valve
If your shower has a single handle, the plumbing system may have a mixing valve. Shower Head temperature and water pressure may fail when mixing valves, which regulate the amount of hot and cold water that flow through the showerhead, are worn down through frequent usage and ageing.
A blocked shut-off valve is another frequent cause of a decline in water pressure. Checking the main shut-off valve of the house is crucial if you’ve just had work done on it or moved into a new residence. Unprofessional plumbers accidentally turn off the water valve before finishing the work and then forget to put it back on.
How to Improve Shower Water Pressure (and other taps)
-
Replace your current showerhead with a new one
It’s simple to replace the old showerhead with a new one if you have a low-flow showerhead or think your present fixture is too damaged to use. To deal with low water pressure, there are showerhead choices. Before you start experimenting with more costly options, it would be a better idea to ask your qualified plumber to replace the showerhead.
-
Examine the Plumbing Valves
You may verify that the stop cocks are fully open if there doesn’t seem to be anything wrong with your plumbing and there is low pressure at other taps as well. They may be found near the WC as well as beneath sinks and basins in the kitchen, bathroom, and laundry rooms.
-
Take showers when it’s not busy.
The majority of people are unaware that occasionally taking showers off-peak is the greatest option. The popularity of certain hours of the day, such as from 7 to 9 in the morning and from 5 to 7 in the evening, tends to outweigh the availability of water at such times. Simply said, the most economical approach to deal with low water pressure when you take a shower is to change your shower routine.
Tired of the little water pressure? Don’t tolerate it!You may get in touch with us at any time.
-
Get in touch with a certified plumber and arrange regular inspections.
Remember that you may always hire a qualified plumber to handle the issue for you. Most of the time, the problem can be resolved with a fast maintenance check, which will also reveal if your plumbing has any underlying issues. Using a qualified plumber, like us at Purified Plumbing in Hornsby ensures the task is done well the first time and won’t bother you in the future.
Since that these problems may be avoided, scheduling routine checks once or twice a year is equally crucial. You won’t have to go without thanks to the extensive selection of bathroom and plumbing services we provide at Andrew Vanny Plumbing, including maintenance, installation, repair, and even emergency plumbing services.
