How to Troubleshoot iRobot Roomba not Connecting to WiFi?

OrRr YOURThe iRobot Roomba is an eminent robot vacuum. You can expect clean surroundings from this excellent robot vacuum. This Roomba offers several new features to you. Such as, you can control the Roomba from far away, as it can function separately. You can give instructions to this vacuum via voice controls, which require a constant WiFi connection. So when the Roomba not connecting to WiFi, it will not work effectively.

You need to accurately connect your Roomba to WiFi in order to get the best out of it. If the Roomba i4 not connecting to WiFi, don’t worry! This issue is common therefore, you can troubleshoot it simply as well. Today, we’ll discuss the reasons for the iRobot Roomba i3 not connecting to WiFi.

Why is My Roomba not Connecting to WiFi?

There are various reasons responsible for the iRobot Roomba not connecting to Wifi . It’s not always due to a poor internet connection. There could be internal as well as external issues with the Roomba and the router. As we go, we’ll tell you what you can do for each problem. Some of the most common reasons are as follows:

• The base station is distant from the router
• No internet connection
• The Roomba is out of the router’s coverage area
• Isn’t connected to your router

If you have been wondering why is my Roomba not connecting to WiFi, these are some reasons for the iRobot Roomba 675 not connecting to WiFi. For the Roomba to work efficiently, you need to connect your robot to the WiFi accurately. Further, we’ll discuss how you can eliminate these issues.

Fix: My Roomba is Not Connecting to WiFi

For the robot to work efficiently, you need to resolve the problem. To fix the Roomba not connecting to WiFi, follow the steps below:

Inspect the Router

• You need to check the router and ensure it’s working properly.
• In most cases, the router is the problem. So you need to fix it.
• If the router isn’t working properly, you can try updating its firmware or power cycling it.
• When the issue persists, you need to reset the router. The reset will eliminate any internal issues with the router.
• You just need to remember that the reset will restore the factory default settings of the router. 
• So you will need to configure it again after the reset.

Check the Frequency of the WiFi

• Routers have two frequency bands; 2.4GHz and 5.0 GHz.
• The 2.4GHz is suitable best for devices that can function from far away from the router.
• Moreover, the 5GHz band is suitable for equipment that can work nearby the router.
• So, not every Roomba device supports the 5GHz band. You need to check if your Roomba supports it.
• If you have connected your Roomba to the 5GHz, then it won’t work.
• You can connect your Roomba to the 2.4GHz band from the RoombaHome app.

Relocate the Base Station

• You need to connect your Base Station to the router as well, as it sends the signal to the Roomba.
• If the station is too far from the router, there will be a poor connection.
• You need to move the base station closer to the router for a seamless connection.
• Check there are no objects in the router and the base station’s path, blocking the signal.
• Without a stable internet connection, the Roomba won’t work.

Connect to a New WiFi Network

• If there are several devices connected to the WiFi, the network could be disturbed.
• You can connect the Roomba to another network from the app.
• All you need to do is go to the settings and connect to the network and enter its password.
• Or you can remove the devices connected to the WiFi to stop the interference.
• Ensure the network you connect the Roomba to is close by.

Ensure the Device is Powered on

• If the Roomba i4 not connecting to WiFi issue persists, check that the Roomba is On.
• When the Roomba is sitting on the base station, ensure it is on. Notice the behavior of the light.
• If it’s not On, press the ‘Clean’ button on the Roomba to power it On.
• You can also check the cable connection and ensure no connection is loose.
• If the cables are damaged, you will need to replace them.

Reboot the Roomba, Phone, and Router

• If you are facing the Roomba connected to WiFi but not app issue, then you can try rebooting your phone, Roomba, and router.
• All you need to do is, power off the device and unplug them all.
• After a few minutes, you can plug them all back in and power them on.
• Now, you can try connecting the Roomba to the app again.
• This should fix the Roomba connected to WiFi but not app issue.

Reset the Roomba

• If none of these methods are working, you can reset the Roomba.
• You can reset the Roomba from the app and from the device.
• For the reset through the app, open the app.
• You need to connect the Roomba and the app to the same network.
• After that, go to settings.
• In settings, you will see the option of ‘Remove the Device/ Factory Reset the Device’.
• At last, you need to click on this option to reset the device.
• To reset the Roomba manually, you need to locate the reset button.
• Thereafter, press the reset button for a few seconds.
• This process may vary for each individual Roomba model.
• This should restore the factory default settings of the Roomba.
• Now you can reconfigure the robot again and it should work fine now.

These are some troubleshooting methods you can try to fix the iRobot Roomba not connecting to WiFi Reddit. If you had to reset the Roomba, then you need to set it up again in the app.

How to Reconnect the Roomba to the WiFi?

Now, that you have reset the Roomba to fix the Roomba 671 not connecting to WiFi issue, you need to reconnect the Roomba to your WiFi network. The procedure for this is as follows:

• To begin with, connect your device to your WiFi network, 2.4GHz band, and enable Bluetooth on your device.
• Ensure the Roomba is on the charging dock and launch it from the app.
• After that, if you are adding it for the first time, click on ‘Add Robot’.
• Now, you can set a name for your vacuum and click on ‘Continue’.
• Thereafter, enter the password of the WiFi network and tap on ‘Continue’.
• The Roomba should automatically connect to your network.
• If you only want to connect your Roomba to a network, you can just go to ‘Network Settings’ to do that.

This is how you can connect your vacuum to a new network to fix the iRobot Roomba i3 not connecting to WiFi issue. If there are any other issues you are having with your Roomba, connect with our team right now!

There are plenty of possible reasons for your Roomba not connecting to your Wi-Fi network and the iRobot Home mobile app. The culprit can be your router’s setting, your phone/tablet, your Internet connection, or the vacuum itself. Following the suggestions above can help you find the problem before getting your vacuum looked at by a technician.